Unable to Continue Please Remove opt sbgrid and programs
SBGrid Installation Manager CLI Installation and Usage
sbgrid-cli
is a command line installation manager application for the SBGrid software collection. The SBGrid installation manager is available in graphical and command-line flavors for macOS and Linux. These can be interchanged for the same installation.
Download
You can find all versions including GUI and CLI on our download page.
latest sbgrid-cli download
sbgrid-cli for linux
sbgrid-cli for macOS
Usage
This page covers the usage of the installation manager graphical user interface (CLI). For usage information on the latest graphical interface (GUI), see here.
The SBGrid installation manager requires an SBGrid Consortium user account. Set up an account by registering here : SBGrid registration
- SBGrid Installation Manager CLI Installation and Usage
- Download
- Usage
- Requirements and recommendations
- Installation
- General Usage
- Activation
- Restoring from a saved config using reactivate
- Migrating existing accounts
- Listing available titles, status
- Getting Information about titles
- Installing and removing
- Updating titles
- Remove obsolete titles
- Automated installation and updates
- Rebuild an installation
- Troubleshooting and diagnostics
- Check network connectivity
- diagnostics and tests
- verify configuration files
- Install software for multiple platforms
- Logging
- Configuring a proxy
- Software Version Management in the SBGrid environment
- Running SBGrid software
- Known Issues
- Deprecated releases
Requirements and recommendations
sbgrid-cli
is single binary executable and should work on most modern Linux distributions.
The SBGrid installation manager will install the software collection to /opt/sbgrid by default (though this can be changed). A symlink from /programs to the installation directory is required and this step does require admin priveleges. Admin privileges are not required to run the applications. This is only for the initial installation, specifically the creation of /opt/sbgrid (if desired) and for /programs (required).
The sbgrid-cli
install manager uses 'sudo' for priveleged installation tasks. As such, it should be used from an account with sudo privileges if this functionality is desired. Alternatively, software installation can be completed without sudo and the /programs link can be added manually later. The software will not be functional without this path.
While not strictly required, we recommend a dedicated 'sbgrid' user account for software management, particularly on multiuser systems. This ensures the software can't be modified by user accounts and that data won't be mistakenly saved into the software stack and lost inadvertantly during software updates. The sbgrid-cli
program will add and remove software. If user data files are accidentally saved into the software collection, they are likely to be lost.
Apple Silicon macs will need to install Rosetta2 to use sbgrid-cli and most of the SBGrid software collection. Rosetta2 can be installed with this command:
/usr/sbin/softwareupdate --install-rosetta
Installation
The sbgrid-cli
program is a single executable and does not have any dependencies or requirements. Untar the archive on the command line with :
tar -zxf <archive_file.tar.gz>
where the "archive file" is the name of the tar.gz file downloaded from the links above.
MAC USERS PLEASE NOTE If you encounter a pop-up warning about an "unidentified developer", you need to strip apple's quarantine extended attribute from the sbgrid-cli
executable. This is easy to do.
First, cancel the dialog and then run this in your terminal:
xattr -d com.apple.quarantine sbgrid-cli
You should then be able to run the application normally without warnings)
You can use curl to download the tarball directly in your terminal. This approach has the added benefit of not triggering the macOS "unidentified developer" Gatekeeper response which requires the xattr step below.
curl -k -LO https://sbgrid.org/wiki/downloads/sbgrid-cli_2.2.18_macos.tar.gz
Untar and run the application to test.
General Usage
The SBGrid command line installation manager takes subcommands and arguments to those commands to perform various tasks. These can be found in the usage info shown above. Each subcommand can also take a -h or --help argument to show more detailed usage info. For example :
$ sbgrid-cli install --help
will produce the help info for the install
subcommand.
Activation
To install the software, you must activate your installation with valid credentials provided by SBGrid. This process is only required for the initial installation of the software and is not required to add/remove/upgrade titles.
Activate with the activate
subcommand
$ sbgrid-cli activate --help SBGrid Installer 2.2.9 f593932a17 — _______ _____ _ __ / __/ _ )/ ___/___(_)__/ / _\ \/ _ / (_ / __/ / _ / /___/____/\___/_/ /_/\_,_/ C o n s o r t i u m USAGE — activate ▸ sbgrid-cli activate [site] [user] [key] [OPTIONS...] ARGUMENTS [site] The installation site provided in your activation credentials [user] The username provided in your activation credentials [key] The activation key provided in your activation credentials OPTIONS -k, --credential-key <key> Activate with a single credential key --darwin Specify macOS as a platform --no-link No symlink creation, no sudo prompt. --linux Specify Linux as a platform --skip-folder-checking Skips checking if a folder with programs already exists -t, --target <target> Specify a custom installation target
Some useful options here are :
--no-link
skips creatation of a symlink at /programs. Useful for installs without sudo
--skip-folder-checking
skips the check for software that is already installed. Will overwrite existing installations.
--target
Set the install directory to a different path than /opt/sbgrid
Trouble activating? See Troubleshooting options further down this page.
Restoring from a saved config using reactivate
reactivate subcommand can restore from a saved config file. This config includes all titles and versions from a saved installation. Useful for moving installations or reproducing installations.
$ sbgrid-cli reactivate <configPath> [OPTIONS...]
Migrating existing accounts
The sbgrid-cli feature allows a user to change between SBGrid accounts. This can be useful in a few circumstances:
- Moving between SBGrid member labs
- To change the ownership of an existing installation
- To change from legacy SBGrid account to a new account which allows installation of BioGrids (migration guide here)
The process is does not require reinstallation, downloading new software or extensive changes to the filesystem (and should be fast).
$ sbgrid-cli migrate-account [site] [user] [key] [OPTIONS...] ARGUMENTS [site] The installation site provided with your new account credentials [user] The username provided with your new account credentials [key] The activation key provided with your new account credentials
For example, to move to a new account with creditials site: harvard_123i user:bjones key:2MHNCPpGreyJi48v0DaeYjH6l5duRNyO
, you would use:
sbgrid-cli migrate-account harvard_123i bjones 2MHNCPpGreyJi48v0DaeYjH6l5duRNyO
Alternatively, the command can be run as sbgrid-cli migrate account
and the program will prompt for new site, user, key info on the command line.
Listing available titles, status
The sbgrid-cli list
command will show all available titles. They are normally colored by their installation status. Available options :
list
-a, --all-versions List all available versions for a title -c, --collections List the available software collections -d, --default-versions List only the default version for a title --long-format Use the long format to display the title list --one-column Format the output into a single column
The list
subcommand has several options
USAGE — list ▸ sbgrid-cli list [title...] [OPTIONS...] ARGUMENTS [title...] The names of the software titles to list OPTIONS -a, --all-versions List all available versions for a title -c, --collections List the available software collections --darwin Specify macOS as a platform -d, --default-versions List only the default version for a title --linux Specify Linux as a platform --long-format Use the long format to display the title list --one-column Format the output into a single column
Note --collections
can be used to see subsets of software as listed at https://sbgrid.org/software/.
updates
sbgrid-cli updates
Shows available updated titles and versions
$ sbgrid-cli updates ------------------------------------------------------------------------------------ info: Retrieving package metadata... The following installed packages have updates available (x86_64-linux): - cryodrgn@0.3.0b => 0.3.1 (new default) - imod@4.11.0 (patch for installed default version) - ligplotplus@2.2 (patch for installed default version) - r@3.6.2 (patch for installed version)
Updates are either new default versions (new default), or updates to an existing version (patch for installed version). The patch versions are usually bug or configuration fixes.
obsolete
Shows obsolete versions that will be removed. Obsolete versions are previously installed versions no longer included in the SBGrid installation.
$ sbgrid-cli obsolete [OPTIONS...]
Getting Information about titles
info
The info subcommand shows information about each title, including a description and links to documentation can be show with the sbgrid-cli info <title>
command. See example below.
$ sbgrid-cli info <title...> [OPTIONS...]
For example, info for RELION :
$ sbgrid-cli info relion ------------------------------------------------------------------------------------ Package information for relion (x86_64-linux): Package: RELION Name slug: relion Architecture: x86_64-linux Available version(s): * 1.3 (installed) depends on: openmpi (1.8.4) * 1.4 (installed) depends on: openmpi (1.8.4) * 1.4b (installed) depends on: openmpi (1.8.4) * 1.4-randomphase3d (installed) depends on: openmpi (1.8.4) * 2.1_cu8.0 (installed) depends on: cuda (8.0), openmpi (2.1.2) * 3.0.4_cu9.0 (installed) depends on: cuda (9.0), openmpi (2.1.2) * 3.0.8 (installed) depends on: openmpi (2.1.3) * 3.0.8_cu10.1 (installed) depends on: cuda (10.1), openmpi (2.1.2) * 3.0.8_cu8.0 (installed) depends on: cuda (8.0), openmpi (2.1.2) * 3.0.8_cu8.0_slurm20 (installed) depends on: cuda (8.0.44), openmpi (3.1.6_slurm-20.02.03) * 3.0.8_cu9.0 (installed) depends on: cuda (9.0), openmpi (2.1.2) * 3.0.8_cu9.2 (installed) depends on: cuda (9.2), openmpi (2.1.2) * 3.1.0 (installed) depends on: openmpi (3.1.6) * 3.1.0_cu10.2 (installed) depends on: cuda (10.2.89), openmpi (3.1.6) * 3.1.0_cu8.0 (installed) depends on: cuda (8.0.44), openmpi (3.1.6_compat) * 3.1.0_cu8.0_compat (installed) depends on: cuda (8.0.44), openmpi (3.1.6_compat) * 3.1.0_cu8.0_slurm20 (installed) depends on: cuda (8.0.44), openmpi (3.1.6_slurm-20.02.03) * 3.1.0_cu9.2 (installed) depends on: cuda (9.2.88), openmpi (3.1.6) * 3.1.1 (installed) depends on: openmpi (3.1.6) * 3.1.1_cu9.2 (installed, default) depends on: cuda (9.2.88), openmpi (3.1.6) Grid(s): sbgrid Collection(s): Electron Microscopy Description: (REgularised LIkelihood OptimisatioN) a stand-alone computer program for Maximum A Posteriori (MAP) refinement of (multiple) 3D reconstructions or 2D class averages in cryo-electron microscopy. Technical notes: SBGrid Usage Info RELION versions > 2.0 are GPU-accelerated using Nvidia CUDA on Linux. For general information on running GPU accelerated applications from SBGrid, please see here : https://sbgrid.org/wiki/gpuCUDA builds of RELION re designated by a '_cu' suffix in the version of the application. For example, 3.1.0_cu9.2 is linked against CUDA v9.2 libraries. All builds are single precision on the GPU and can be run on 'consumer-grade' GPU hardware.RELION builds without CUDA support are compiled with Intel 2019.5 with accelation options and Intel math libraries. RELION and MPI versionsRELION uses the 'mpirun' executable to manage MPI "ranks" for parallel processing. SBGrid includes several OpenMPI versions which are matched to specific RELION versions. When called from the SBGrid capsule environment, the relion GUI is configured to use the correct version of OpenMPI to manage parallel processing. When calling RELION binaries from the command line, the `mpirun.relion` executable can be used. `mpirun.relion` is configured to used the correct version of OpenMPI for each version of RELION. The 3.1.* versions for RELION use the default configuration of OpenMPI (3.1.6 on Linux, 2.1.3 on macOS) and do not require the version to be defined. Older releases use OpenMPI 2.1.2 which should be specified in $HOME/.sbgrid.conf. To set the OpenMPI version, add : OPENMPI_X=2.1.2"to $HOME/.sbgrid.conf and open a new terminal to use the correct mpirun. As noted above, you can also use the `mpirun.relion` executable in place of `mpirun` to use the MPI that matches the currently configured version of RELION. In this case, no other configuration is needed.Version 3.1.0_cu8.0 is compiled to support legacy CPUs (pre-Haswell). OpenMPI 3.1.6_compat is also needed for this version.Versions 3.1.0_cu8.0_slurm20 3.1-beta_cu8.0_slurm20 and 3.0.8_cu8.0_slurm20 support Slurm v20 PMI library. Recent Changes2.2.9111 : Add 3.1.1 RELION versions20200703 : Add 3.1.0 release version20200629 : reconfigure RELION gui to automatically use correct 'mpirun' in capsules.20200610 : rebuild of 3.1-beta releases with OpenMPI 3.1.6 from commit 5997001. Known Issues20200610 : Empty values in GUI during autopicking can be interpreted as Text instead of Float values. Deprecated versionsThe following verions are deprecated and will be removed in a future SBGrid update.20200706: 3.0.8_cu10.1 3.0.8_cu9.2 3.0.8_avx2 3.1-beta_cu9.2 3.1-beta_cu10.1 (c) Copyright 2008, Structural Biology Grid (www.sbgrid.org) Last Update to this document# Jason Key 0a6b896 2020-11-15 18:39:38 -0500 Links: Website: http://www2.mrc-lmb.cam.ac.uk/relion/index.php/Main_Page Manual: http://www2.mrc-lmb.cam.ac.uk/relion/index.php/Main_Page Forumhelp: https://www.jiscmail.ac.uk/cgi-bin/webadmin?A0=CCPEM
The info
subcommand includes all version info, dependencies ( which are automatically installed), technical notes and relevant links.
Installing and removing
Install and remove titles with the sbgrid-cli install <title>
and sbgrid-cli remove <title>
command. Each of these commands can take multiple titles with versions at one time.
install
sbgrid-cli install [title...] [OPTIONS...] ARGUMENTS [title...] The name(s) of the software title(s) to install. To specify a non-default version, append @ and the version number to the name of the title (e.g. xyz@1.2.3). OPTIONS --all-titles Installs all the available titles --all-versions This will install all the available versions for a specified title or collection -c, --collection <title> The title of a software collection to install --darwin Specify macOS as a platform --linux Specify Linux as a platform -j, --num-workers <num-workers> Run installation tasks in parallel number, default: 1 --reinstall Force the reinstallation of already installed packages
Installation Examples
Install a single default version of an application, adxv :
$ sbgrid-cli install adxv - Install adxv@1.9.14 (x86_64-linux) - Installation setup (x86_64-linux). Continue? … yes info: (1/2) Installing adxv@1.9.14 (x86_64-linux)... info: Installation complete for adxv@1.9.14 (x86_64-linux) info: (2/2) Setting up your installation... $
Install a specific version of a adxv :
$ sbgrid-cli install adxv@1.9.11
Install all versions of adxv :
$ sbgrid-cli install adxv --all-versions
Install the 'Electron Microscopy' collection of titles (see above list command to list collections):
$ sbgrid-cli install -c 'Electron Microscopy'
Install all default versions of all titles :
$ sbgrid-cli install --all-titles
Install all versions of all titles ( The full collection):
$ sbgrid-cli install --all-titles --all-versions
Note the --reinstall
flag can be added to all commands to reinstall titles that have already been installed.
remove
Same options as install subcommand above.
$ sbgrid-cli remove [title...] [OPTIONS...]
Updating titles
Updates are performed when default titles change to a new version or bugs are fixed in existing verisons. To update, use the update subcommand.
update
$ sbgrid-cli update relion
Remove obsolete titles
Use the clean subcommand to list or remove obsolete versions or titles
clean
$ sbgrid-cli clean [OPTIONS...]
Automated installation and updates
sbgrid-cli
can be used in an automated method to periodically install all new titles, all new versions of an updated title, and remove obsolete versions no longer included in the collection. This method is similar to the sbgrid-admin
script used for SBGrid site installations, but with several notable benefits. sbgrid-cli
allows rolling updates to the software collection so new titles are added continuously. Only updates are installed so data transfers are quick and efficient.
For automated installation of all versions of all titles, this command should be added to crontab for the sbgrid software management account:
sbgrid-cli admin --all-versions -j 4
To only install default versions ( older versions will not be installed but are retained ), use :
sbgrid-cli admin -j 4
To include software for macOS on a linux host ( ideal for NFS shares )
sbgrid-cli admin --all-versions -j 4 --linux --darwin
To automate the process the commands above can be added to the crontab of the 'sbgrid' user account. This can be done with the sbgrid-cli crontab
command (see below). For example, the crontab configuration line below will check for new versions every 15 minutes.
*/15 * * * * /programs/x86_64-linux/sbgrid_installer/latest/sbgrid-cli admin --all-versions -j 4
Run periodic installation, update and removal. Installs all new titles, updates where appropriate and removes obsolete versions
$ sbgrid-cli admin
For example running
$ sbgrid-cli admin
will install all default, update all installed titles and remove all obsolete versions while
$ sbgrid-cli admin --all-versions
will install all versions of all titles, add any new titles, update any pending updates, and remove obsolete versions.
The sbgrid-cli admin
functionality replaces the legacy sbgrid-admin installation script. For a tutorial on setup and migration, please see this page.
crontab
Adds a line to the user crontab to configure periodic updates.
The default crontab configuration is to check for new titles every 15 minutes:
*/15 * * * * /opt/sbgrid/x86_64-linux/sbgrid_installer/latest/sbgrid-cli admin
but can be modified with the following options.
--all-versions This will install all the available versions for all the available titles boolean --darwin Specify macOS as a platform --linux Specify Linux as a platform -j, --num-workers <num-workers> Run installation & update tasks in parallel number, default: 4
For more info on cron, see https://www.man7.org/linux/man-pages/man5/crontab.5.html
Rebuild an installation
rebuild
rebuild
rebuilds the installation environment configuration files. Usually this step is automatic but can be run manually for troubleshooting.
$ sbgrid-cli rebuild
save
The save subcommand saves the current configuration so it can be restored at a later stage or replicated on another machine or in the cloud.
Troubleshooting and diagnostics
Check network connectivity
check-connection
Provides network diagnostics for connectivity to SBGrid at Harvard Medical School.
$ sbgrid-cli check-connection info: (1/1) Checking connection... info: Checking services... info: Checking sync2.sbgrid.org (port: 8080) ... info: Checking sync2.sbgrid.org (port: 873) ... info: Checking sync2.sbgrid.org (port: 27010) ... info: Checking sbgrid.org (HTTPS) ... info: Checking sbgrid.org (HTTP) ... info: Connectivity test succeeded, all remote services are reachable
diagnostics and tests
diag Run troubleshooting and diagnostic tests for the software collection.
verify configuration files
verify
Lists missing software versions and .rc files.
Install software for multiple platforms
On linux, add the --darwin command to install / remove for macOS . Conversely, use the --linux command to install / remove for Linux while on macOS. These flags can be added to many of the subcommands to limit to Linux or macOS. Useful for servers that share a software stack over NFS.
$ sbgrid-cli list --darwin
This will list all software available for macOS. The platform flag ( --linux
or --darwin
) is implied for the platform used to install the software, i.e. on linux, --linux
is redundant.
Logging
sbgrid-cli
writes log files to $HOME/.sbgrid/logs
Configuring a proxy
sbgrid-cli
will use the HTTP_PROXY
and/or HTTPS_PROXY
variables if set in the environment. For example, adding
export HTTP_PROXY="http://my.example.proxy:3128"
will use the value above to make outbound http connections.
Software Version Management in the SBGrid environment
If you have a single version of an application installed, explicit version selection in your environment is not needed.
In the case of multiple installed versions, the SBGrid Default version will be the version available at the terminal when it is installed, unless configured otherwise in ~/.sbgrid.conf.
In the case of multiple non-default versions installed, the latest release will be version available in your shell. If you would like to have more than one version of a title installed, and prefer to use an older release or the non-default version when a default version is installed, you must set this explicitly in your ~/.sbgrid.conf file. This is the same as in the standard SBGrid environment.
Version priority in the shell
- ~/.sbgrid.conf
- Installed single version
- Installed Default version
- Latest installed release
There is more info on how to manage versions here --> SBGrid version overrides
Running SBGrid software
To use the software at the terminal in bash, open a new terminal and run
$ source /programs/sbgrid.shrc
or in tcsh
$ source /programs/sbgrid.cshrc
For more info on system configuration for SBGrid software, please check here ---> Workstation setup.
Known Issues
rsync required on 873 or 8080. The application will fail if outbound port 873 and port 8080 are blocked by your institution or are otherwise not available. You can check if you can access port 873 here and port 8080 here
Deprecated releases
For the unsupported sbgrid-cli version 1, see here
For help or to report issues, please email bugs@sbgrid.org.
Source: https://sbgrid.org/wiki/sbgrid-cli
0 Response to "Unable to Continue Please Remove opt sbgrid and programs"
ارسال یک نظر